-
패브릭 스위치 가리개를 만들었어요.소소한 바느질/소품 2022. 10. 11. 16:53
앞서 콘센트 가리개 포스팅에서 언급했던 스위치 가리개를 완료했어요.
단순하게 양면 테이프로 고정하는 방식의 패브릭 가리개입니다.
라미(기계 모시) 원단 두 가지와 라미네이팅 코팅이 된 레이스 원단을 사용해 7장을 만들었어요.
크기는 가로세로 10 X 15 Cm 가량입니다. 이번에도 100% 손바느질 작업이에요.
부채꼴로 펼쳐 보았어요. 자수가 놓인 가리개는 2구와 3구 스위치에서 주로 사용하는 스위치의 켜짐 표시예요.
전체를 펼쳐 놓았습니다. 다림질을 했지만 자수틀 자국이 약간 남아 있어요.
라미네이팅 코팅된 가리개 중 하나는 욕실 콘센트용이고 다른 하나는 가스 레인지 옆에 위치한 다용도실 스위치용이에요.
물을 막거나 혹은 가끔 세척이 필요한 위치여서 라미네이트 원단을 선택했습니다.
자수는 프랑스 자수실을 사용했어요. 간단하게 레이지데이지 스티치와 프렌치 너트 스티치 두 가지만으로 만들었습니다.
자수 놓기 전 실에 왁스를 바르고 완성 후 다림질을 했더니 프렌치 너트 부분이 납작해져 버렸어요.
라미 원단의 테두리는 곱솔(깨끼 바느질)을 약식으로 하는 방식을 사용했습니다.
곱솔은 원래 3번 바느질을 해야 하는데 기준선이 되는 첫번째 바느질을 생략하고 송곳으로 선을 긋고 그 선 따라 접은 다음 2번째와 3번째 바느질을 해서 완성했습니다. 그래서 앞면에는 실이 한 줄로, 뒷면에는 두 줄로 보여요.
이것도 처음에는 두 줄의 바느질 선에서 땀을 맞추면서 바느질하기도 했는데 나중에는 귀찮아져서 그냥 하기도 했어요.
라미네이팅 코팅 원단은 올풀림이 없기 때문에 한 번 접어서 바느질하는 것으로 마감했어요.
라미 원단 두 가지는 밝은 베이지색과 P 베이지라고 명명된 색 두 가지를 사용했어요.
왼쪽의 밝은 베이지는 서문시장에서 구입했고 오른쪽의 P 베이지는 온라인 패션스타트에서 구입한 거예요.
살구톤의 베이지와 회색톤의 베이지로 구분할 수 있겠어요.
스택 사진입니다. 약간 펼쳐 보이게 쌓았어요.
그냥 모아서 쌓은 옆모습입니다. 라미 원단 가리개는 모서리 부분이 손바느질 특유의 물결이 나타나요.
모서리는 겹쳐져서 두께가 있다 보니 다림질할 때 덜 다려지고 조금 밀리기 때문에 그런 듯해요.
사용 재료는 라미 모시 원단 베이지와 P 베이지, 라미네이트 코팅 레이스 원단 그리고 프랑스 면 자수실입니다.
P베이지의 라미 원단은 다른 라미 원단을 찾다가 발견을 했는데 사놓고는 그 동안 까맣게 잊고 있었어요.
그것도 이게 뭐지?라고 잠시 생각을 하고서야 어떻게 구입하게 되었는지가 떠올랐어요.
예전에는 원단마다 지퍼백에 넣고 네임펜으로 비닐에 종류나 두께 관련 정보를 적어놨기 때문에 '라미'라고 적힌 글을 보고 발견을 했지 안 그랬으면 아마도 더 오랬동안 잊혀져 있었을 거예요.
촬영을 하느라 아직 스위치에 가리개 설치를 못했는데 포스팅 완료하면 돌아다니면서 붙여야겠어요.
사용후기는 특별한 단점이 나타나지 않으면 아마도 없을 듯해요.
'소소한 바느질 > 소품' 카테고리의 다른 글
패브릭 스위치 가리개를 더 만들었어요. (0) 2022.11.16 괴불 노리개와 복숭아 노리개를 만들었어요. (0) 2022.10.27 성당창문 콘센트 가리개를 만들었어요. (1) 2022.10.08 큐렛 케이스용 조리개 파우치를 만들었어요. (0) 2022.04.07 특별한 용돈 파우치를 만들었어요. (0) 2022.01.12