-
1구 목걸이 펜홀더입니다.소소한 바느질/소품 2015. 4. 12. 17:06
4구, 6구 파우치 주문과 함께 샘플 제작을 부탁받은 1구 목걸이형 펜홀더입니다.
파우치 만들면서 사이즈를 잘못 잘랐던 원단으로 제작했어요.
가죽이 아니라 원단 제작이어서 앞뒷면을 따로 하지 않고 옆에서 접는 방식으로 디자인했습니다.
곡선의 모양도 나름 신경을 썼는데 부드러운 재질이라 모양이 딱 고정되지는 않아요.
길이는 18센티이고 폭은 입체라서 2.5~3.5센티 가량입니다.
라미 만년필을 넣은 전체 모습입니다. 클립까지 통째로 들어가요. 아일렛에 펜이 닿지 않도록 길이를 조금 넉넉하게 잡았습니다.
네스홈의 셀리미예 모스크 패턴 린넨 원단과 민트색 해지 면 원단을 사용했어요.
뒷모습입니다.
상세샷입니다. 아일렛은 2호 실버를 사용했습니다.
스트링은 보라색 그라데이션 2mm 면끈이고 끝은 도래매듭을 했습니다. 총 90센티인데 줄 길이를 조정할 수 있도록 스토퍼를 끼웠어요.
뒷모습 상세입니다.
아래는 양쪽을 접어서 묶기로 고정했어요.
옆의 겹쳐지는 부분에도 묶기를 해서 힘을 더해줬습니다.
만년필 없이 전체샷입니다.
스토퍼로 길이 조절이 가능한데 가장 길게 사용하려면 스토퍼를 펜홀더 쪽으로 내리면 됩니다. 정히 귀찮으면 매듭 풀고 빼도 되고요.
사용재료는 네스홈의 Selimiye Mosque Design Pattern Linen과 민트색 해지 면 트윌 원단, 2온스 접착솜, 2호 아일렛 실버, 2mm 그라데이션 면끈, 검정색 스토퍼입니다.
목걸이형 펜홀더는 보관용이 아니라 바로바로 사용하기 위한 용도라서 넣고 빼기 쉽도록 크기를 넉넉하게 했어요. 쉽게 빠지지 않게 하려면 클립을 바깥으로 해서 넣으면 됩니다.
일단은 오른손으로 사용하기 편하도록 디자인했는데 왼손잡이의 경우는 좌우를 바꿔서 제작하면 됩니다.
이번엔 접착솜을 겉감 쪽으로 붙였는데 솜을 얇은 것을 사용했기 때문에 어느 쪽으로 붙여도 괜찮은 듯합니다.
이번에 손바느질은 3군데 묶기를 한 부분만이에요. 그 외에는 아일렛을 다느라 부득이하게 아랫집에 소음을 좀 전달했습니다. 죄송합니다.
+ 넣고 뺄 때 아일렛에 펜이 닿는 걸 염려하는 이야기를 들어 매듭 위치를 바꾸었어요. 아예 매듭을 아일렛 앞으로 하면 펜이 금속성인 아일렛에 닿을 일이 없거든요. 다음 제작하는 펜홀더는 매듭을 앞으로 해서 사진을 찍어볼게요.
'소소한 바느질 > 소품' 카테고리의 다른 글
올해도 패브릭 카네이션을 만들었어요. (0) 2015.04.30 두 번째 오골계 꼬꼬바구니입니다. (0) 2015.04.14 4구 만년필 파우치 샘플입니다. (0) 2015.04.10 성당창문 티코스터 세트 (0) 2015.03.20 새 원단으로 성당창문 잔받침을 만들었어요. (0) 2015.03.15